NEVER hold the chisel! The powerful Slide Sledge® Heavy
Equipment™ Hammer reduces dangerous, time consuming hammer
and chisel jobs to a one-man, one-tool operation. The linear
motion of Slide Sledge focuses power for precision impact to
drive pins and make other tough maintenance jobs easier,
faster and a whole lot safer. Reduce downtime and increase
your profits.
Recommended for pins and bolts greater than 1/2" up to 7/8" in diameter.
Shipping Weight: 4 lbs
Price: $64.79
7/8" Diameter Pin Driver
Part No. RRT-25225
Recommended for pins greater than 7/8" up to 2" in diameter.
Shipping Weight: 5 lbs
Price: $51.45
1 1/4" Diameter Pin Driver
Part No. RRT-25290
Recommended for pins greater than 1 1/4" up to 2" in diameter.
Shipping Weight: 14 lbs
Price: $114.66
2" Diameter Pin Driver
Part No. RRT-25291
Recommended for pins greater than 2" up to 2 1/2" in diameter.
Shipping Weight: 6 lbs
Price: $32.34
2 1/2" Diameter Pin Driver
Part No. RRT-25292
Recommended for pins greater than 2 1/2" up to 3" in diameter.
Shipping Weight: 6 lbs
Price: $41.16
3" Diameter Pin Driver
Part No. RRT-25293
Recommended for pins greater than 3" up to 4" in diameter.
Shipping Weight: 6 lbs
Price: $47.04
5 lb Handle Weight
Part No. RRT-1001001
Increases the Slide Sledge® striking force by 5 lbs. Works with any of the four tools by threading onto tool handle.
Shipping Weight: 7 lbs
Price: $38.89
Curved Chisel Tip
Part No. RRT-25240
1 3/8" tip ideal for chopping away hardened debris & shearing bolts and rivets up to 3/8" grade 8
Shipping Weight: 14 lbs
Price: $95.96
Scarifier Tooth Tip
Part No. RRT-25340
Removes scarifier teeth on most motor graders. The fork design allows the tech to split the trenching arm where the scarifier tooth is forced fit.
Shipping Weight: 14 lbs
Price: $92.02
Bushing Driver Adapter
Part No. RRT-25322
Proper installation of bushing will be accomplished easily and quickly with this adapter driver tip. Fits drivers with a common 3/4" center hole, up to 7/8" high.
Shipping Weight: 11 lbs
Price: $76.48
Race/Bearing/Seal Adapter
Part No. RRT-25321
Install races, bearings, and seals with this adapter driver tip. Add drive plates to the end of the adapter in various combinations. Fits plates with a common 9/16" center hole, up to 3/4" high.
Shipping Weight: 11 lbs
Price: $76.48
Utility Wedge Tip
Part No. RRT-25325
All purpose impact tool designed to separate parts and straighten steel with maximum force.
Shipping Weight: 14 lbs
Price: $90.78
Tie Rod/Ball Separators
Tie Rod/Ball Joint Separator, 3 Tip Set Part No. RRT-25209 Slide Sledge® separator adapter and 11/16", 15/16", and 1 1/8" forks
Price: $109.20
Shipping Weight: 14 lbs
Tie Rod/Ball Joint Part No. RRT-25211
Price: $16.49
11/16"
Shipping Weight: 6 lbs
Tie Rod/Ball Joint Part No. RRT-25212
Price: $18.20
15/16"
Shipping Weight: 6 lbs
Tie Rod/Ball Joint Part No. RRT-25213
Price: $19.31
1 1/8"
Shipping Weight: 6 lbs
Tie Rod/Ball Joint Part No. RRT-25214
Price: $32.78
1 7/16"
Shipping Weight: 6 lbs
Ripper Tooth Pin Removers
3/4" Diameter Ripper Tooth Pin Remover Part No. RRT-25261
Price: $62.19
Use on pins as small as 3/4" and up to 1" with a minimum tooth spacing of 4 1/2"
Shipping Weight: 14 lbs
1/2" Diameter Ripper Tooth Pin Remover Part No. RRT-25280
Price: $61.96
Use on pins as small as 1/2" and up to 3/4" with a minimum tooth spacing of 3 1/2"
Shipping Weight: 14 lbs
3/8" Diameter Ripper Tooth Pin Remover Part No. RRT-25300
Price: $61.96
Use on pins as small as 3/8" and up to 1/2" with a minimum tooth spacing of 2 3/4"
Shipping Weight: 14 lbs
Ripper Tooth Pin Inserters
3/4" Diameter Ripper Tooth Inserter Part No. RRT-25322
Price: $54.63
Use on pins as small as 3/4" and up to 1" with a minimum tooth spacing of 4 1/2"
Shipping Weight: 14 lbs
1/2" Diameter Ripper Tooth Inserter Part No. RRT-25270
Price: $54.91
Use on pins as small as 1/2" and up to 3/4" with a minimum tooth spacing of 3 1/2"
Shipping Weight: 14 lbs
3/8" Diameter Ripper Tooth Inserter Part No. RRT-25310
Price: $54.91
Use on pins as small as 3/8" and up to 1/2" with a minimum tooth spacing of 2 3/4"
Shipping Weight: 14 lbs
Slide Sledge Precision Hammer & Accessories
Slide Sledge Precision Hammer - 4lbs / 18" - Tool Only Part No. RRT-212101 Handle Weight Not Included
Price: $99.50
Shipping Weight: 4 lbs
Slide Sledge Precision Hammer - 4lbs / 18" Kit Part No. RRT-212102 9 Piece Set
Price: $293.97
Shipping Weight: 16 lbs
Precision Hammer Large Ball Peen Tip Part No. RRT-213534 Restore curved areas in no time.
Price: $36.61
Shipping Weight: 1 lbs
Precision Hammer Dinging Tip Part No. RRT-213532 Excels is a broad range of dinging tasks.
Price: $27.93
Shipping Weight: 1 lbs
Precision Hammer Hammerhead Tip Part No. RRT-213535 Ideal for reforming edges.
Price: $48.51
Shipping Weight: 1 lbs
Precision Hammer Chisel Tip Part No. RRT-213537 Create and define body lines.
Price: $42.34
Shipping Weight: 1 lbs
Precision Hammer Long Pick Tip Part No. RRT-213538 Deliver pointed impact in tight areas.
Price: $36.61
Shipping Weight: 1 lbs
Precision Hammer 1 1/2 Lb. Handle Weight Part No. RRT-212804 Optimal size and power for everyday use.
Price: $20.06
Shipping Weight: 2.5 lbs
Precision Hammer 3 Lb. Handle Weight Part No. RRT-212803 Extra power for the tough jobs.
Price: $28.11
Shipping Weight: 4 lbs
Continuous Mining Bit Extractor Accessories (Precision Hammer Only)
Continuous Miner Bit Extractor Part No. RRT-213661
Price: $84.00
Shipping Weight:5 lbs
Adaptor for Precision Hammer Part No. RRT-213660
Price: $48.00
Required to use miner bit extractor (RRT-213661)
Shipping Weight:5 lbs
MANY ACCESSORIES AVAILABLE FROM COTTER KEY PULLERS TO BUCKET TOOTH
REMOVERS.
CALL FOR MORE INFORMATION AND ASSISTANCE IN YOUR SELECTION.
