Easy disassembly allowing operators to work safely on uneven ground.

The unit is immediately ready to use requiring no assembly or disassembly of accessories.

Paid performance with a high degree of simplicity of use requiring only one operator.

Simultaneous insertion or extraction of two clips by two independent clamps.

"Fast clips" located on one side of the rail may be inserted or extracted when there are no clips on the opposite side.

Possible to work with only one of the clamps, either for insertion or extraction, to operate if necessary on only one side of the rail.

The pump unit is the same as that used on the "e clip" machine, incorporating a sturdy and powerful 4-cycle engine, Honda or equivalent, with noise levels according to CARB-EPA standards.

Does not interfere with rail circuits die to the three insulated wheels and is also equipped with an appropriate mechanical joint to allow running without interference on the rail to reach the working area.

Equipped with spot lights oriented to the working areas.

Weight: Pump unit 108 lbs, Clamp unit 145 lbs, Trolley unit 20lbs, 3rd wheel bar 11 lbs.

The pump unit is the same as that used on the PCM-2P "e clip" machine and consequently owners of the PCM-2P need purchase only the PCM-2P/FC clamp unit.